علم الكيمياء
تاريخ الكيمياء والعلماء المشاهير
التحاضير والتجارب الكيميائية
المخاطر والوقاية في الكيمياء
اخرى
مقالات متنوعة في علم الكيمياء
كيمياء عامة
الكيمياء التحليلية
مواضيع عامة في الكيمياء التحليلية
التحليل النوعي والكمي
التحليل الآلي (الطيفي)
طرق الفصل والتنقية
الكيمياء الحياتية
مواضيع عامة في الكيمياء الحياتية
الكاربوهيدرات
الاحماض الامينية والبروتينات
الانزيمات
الدهون
الاحماض النووية
الفيتامينات والمرافقات الانزيمية
الهرمونات
الكيمياء العضوية
مواضيع عامة في الكيمياء العضوية
الهايدروكاربونات
المركبات الوسطية وميكانيكيات التفاعلات العضوية
التشخيص العضوي
تجارب وتفاعلات في الكيمياء العضوية
الكيمياء الفيزيائية
مواضيع عامة في الكيمياء الفيزيائية
الكيمياء الحرارية
حركية التفاعلات الكيميائية
الكيمياء الكهربائية
الكيمياء اللاعضوية
مواضيع عامة في الكيمياء اللاعضوية
الجدول الدوري وخواص العناصر
نظريات التآصر الكيميائي
كيمياء العناصر الانتقالية ومركباتها المعقدة
مواضيع اخرى في الكيمياء
كيمياء النانو
الكيمياء السريرية
الكيمياء الطبية والدوائية
كيمياء الاغذية والنواتج الطبيعية
الكيمياء الجنائية
الكيمياء الصناعية
البترو كيمياويات
الكيمياء الخضراء
كيمياء البيئة
كيمياء البوليمرات
مواضيع عامة في الكيمياء الصناعية
الكيمياء الاشعاعية والنووية
Properties and Uses of Nylons
المؤلف:
sami matar & Lewis. F. Hatch
المصدر:
Chemistry of PETROCHEMICAL PROCESSES
الجزء والصفحة:
p 368
2-10-2017
972
Properties and Uses of Nylons
Nylons are generally characterized by relatively high melting points due to the presence of the amide linkage. They are also highly crystalline, and the degree of crystallinity depends upon factors such as the polymer structure and the distance between the amide linkages. An increase in polymer crystallinity increases its tensile strength, abrasion resistance, and modulus of elasticity.
Hydrogen bonding in polyamides is fairly strong and has a pronounced etfect on the physical properties of the polymer such as the crystallinity, melting point, and water absorption. For example, nylon 6, with six carbons, has a melting point of 223°C, while it is only 190°C for nylon 11.
This reflects the higher hydrogen bonding in nylon 6 than in nylon 11. Moisture absorption of nylons differs according to the distance between the amide groups. For example, nylon 4 has a higher moisture absorption than most other nylons, and it is approximately similar to that of cotton. This is a result of the higher hydrophilic character of nylon 4. Nylons, however, are to some extent subject to deterioration by light. This has been explained on the basis of chain breaking and crosslinking. Nylons are liable to attack by mineral acids but are resistant to alkalies. They are difficult to ignite and are self-extinguishing.
In general, most nylons have remarkably similar properties, and the preference of using one nylon over the other is usually dictated by economic considerations except for specialized uses.
Nylons have a variety of uses ranging from tire cord to carpet to hosiery. The most important application is cord followed by apparel. Nylon staple and filaments are extensively used in the carpet industry. Nylon fiber is also used for a variety of other articles such as seat belts, monofilament finishes, and knitwear. Because of its high tenacity and elasticity, it is a valuable fiber for ropes, parachutes, and underwear. The 1997 U.S. production of nylon fibers was approximately 2.9 billion pounds.