THERMOPLASTIC ELASTOMERS

Thermoplastic elastomers (TPES), as the name indicates, are plastic polymers with the physical properties of rubbers. They are soft, flexible, and possess the resilience needed of rubbers. However, they are processed like thermoplastics by extrusion and injection molding. TPE’s are more economical to produce than traditional thermoset materials because fewer steps are required to manufacture them than to manufacture and vulcanize thermoset rubber. An important property of these polymers is that they are recyclable.

Thermoplastic elastomers are multiphase composites, in which the phases are intimately depressed. In many cases, the phases are chemically bonded by block or graft copolymerization. At least one of the phases consists of a material that is hard at room temperature.45

Currently, important TPE’s include blends of semicrystalline thermoplastic polyolefins such as propylene copolymers, with ethylene-propylene terepolymer elastomer. Block copolymers of styrene with other monomers such as butadiene, isoprene, and ethylene or ethylene/propylene are the most widely used TPE’s. Styrene-butadiene-styrene (SBS) accounted for 70% of global styrene block copolymers (SBC). Currently, global capacity of SBC is approximately 1.1 million tons. Polyurethane thermoplastic elastomers are relatively more expensive then other TPE’s.

However, they are noted for their flexibility, strength, toughness, and abrasion and chemical resistance. Blends of polyvinyl chloride with elastomers such as butyl are widely used in Japan.

Random block copolymers of polyesters (hard segments) and amorphous glycol soft segments, alloys of ethylene interpolymers, and chlorinated polyolefins are among the evolving thermoplastic elastomers.

Important properties of TPE’s are their flexibility, softness, and resilience. However, compared to vulcanizable rubbers, they are inferior in resistance to deformation and solvents. Important markets for TPE’s include shoe soles, pressure sensitive adhesives, insulation, and recyclable bumpers.

مواضيع ذات صلة

تقدير الكتل المولارية من إتزان الترسب

الأسموزية والديلزة Osmosis and dialysis

الحجم والشكل

الوزن الجزيئي للبوليمرات

البوليمرات المؤلفة من سلاسل رئيسة لا عضوية

البوليمرات ذات مجموعة الروابط الإقترانية

تصنيف مركبات الجزيئات الضخمة ذات السلاسل اللامتجانسة

تصنيف مركبات الجزيئات الضخمة الحاوية على سلاسل كربونية

تصنيف وتسمية مركبات الجزيئات الضخمة

الشكل الهندسي للبوليمر

البوليمرات المشتركة

البوليمرات المنتظمة فراغياً