Methyl Ethyl Ketone

Methyl ethyl ketone MEK (2-butanone) is a colorless liquid similar to acetone, but its boiling point is higher (79.5°C). The production of MEK from n-butenes is a liquid-phase oxidation process similar to that used to produce acetaldehyde from ethylene using a Wacker-type catalyst (PdCl₂/CuCl₂). The reaction conditions are similar to those for ethylene.

The yield of MEK is approximately 88%:

Methyl ethyl ketone may also be produced by the catalyzed dehydrogenation of sec-butanol over zinc oxide or brass at about 500°C. The yield from this process is approximately 95%. MEK is used mainly as a solvent in vinyl and acrylic coatings, in nitrocellulose lacquers, and in adhesives. It is a selective solvent in dewaxing lubricating oils where it dissolves the oil and leaves out the wax. MEK is also used to synthesize various compounds such as methyl ethyl ketone peroxide, a polymerization catalyst used to form acrylic and polyester polymers and methyl pentynol by reacting with acetylene:

Methyl pentynol is a solvent for polyamides, a corrosion inhibitor, and an ingredient in the synthesis of hypnotics.

مواضيع ذات صلة

سلوك المعادن الطينية في علاقتها مع الماء

تصنيف النفط الخام Classification of Crude Oils

التحليل المطلق Ultimate Analysis

المكونات الرئيسية للنفط الخام الموجود في منطقة القيارة

نفط خام القيار

النفط الخام ومكوناته

النفط والطاقة Oil and Energy

مزائج اسفلت – اسفلتين

أساليب تحوير المواصفات الريولوجية للاسفلت

صفات الاسفلت الريولوجية Properties of Asphalt Rheological

استخدامات الاسفلت Asphalt Uses of

التركيب الكيميائي للاسفلت Chemical Composition of Asphalt