HYDRATION OF ETHYLENE

(Ethanol Production)

Ethyl alcohol (CH₃CH₂OH) production is considered by many to be the world’s oldest profession. Fermenting carbohydrates is still the main route to ethyl alcohol in many countries with abundant sugar and grain sources.

Synthetic ethyl alcohol (known as ethanol to differentiate it from fermentation alcohol) was originally produced by the indirect hydration of ethylene in the presence of concentrated sulfuric acid. The formed monoand diethyl sulfates are hydrolyzed with water to ethanol and sulfuric acid, which is regenerated:

The direct hydration of ethylene with water is the process currently used:

The hydration reaction is carried out in a reactor at approximately 300°C and 70 atmospheres. The reaction is favored at relatively lower temperatures and higher pressures. Phosphoric acid on diatomaceous earth is the catalyst. To avoid catalyst losses, a water/ethylene mole ratio less than one is used. Conversion of ethylene is limited to 4–5% under these conditions, and unreacted ethylene is recycled. A high selectivity to ethanol is obtained (95–97%).

مواضيع ذات صلة

سلوك المعادن الطينية في علاقتها مع الماء

تصنيف النفط الخام Classification of Crude Oils

التحليل المطلق Ultimate Analysis

المكونات الرئيسية للنفط الخام الموجود في منطقة القيارة

نفط خام القيار

النفط الخام ومكوناته

النفط والطاقة Oil and Energy

مزائج اسفلت – اسفلتين

أساليب تحوير المواصفات الريولوجية للاسفلت

صفات الاسفلت الريولوجية Properties of Asphalt Rheological

استخدامات الاسفلت Asphalt Uses of

التركيب الكيميائي للاسفلت Chemical Composition of Asphalt