Shift Conversion

The product gas mixture from the secondary reformer is cooled then subjected to shift conversion.  In the shift converter, carbon monoxide is reacted with steam to give carbon dioxide and hydrogen. The reaction is exothermic and independent of pressure:

The feed to the shift converter contains large amounts of carbon monoxide which should be oxidized. An iron catalyst promoted with chromium oxide is used at a temperature range of 425–500°C to enhance the oxidation.

Exit gases from the shift conversion are treated to remove carbon dioxide. This may be done by absorbing carbon dioxide in a physical or chemical absorption solvent or by adsorbing it using a special type of molecular sieves. Carbon dioxide, recovered from the treatment agent as a byproduct, is mainly used with ammonia to produce urea. The product is a pure hydrogen gas containing small amounts of carbon monoxide and carbon dioxide, which are further removed by methanation.

مواضيع ذات صلة

سلوك المعادن الطينية في علاقتها مع الماء

تصنيف النفط الخام Classification of Crude Oils

التحليل المطلق Ultimate Analysis

المكونات الرئيسية للنفط الخام الموجود في منطقة القيارة

نفط خام القيار

النفط الخام ومكوناته

النفط والطاقة Oil and Energy

مزائج اسفلت – اسفلتين

أساليب تحوير المواصفات الريولوجية للاسفلت

صفات الاسفلت الريولوجية Properties of Asphalt Rheological

استخدامات الاسفلت Asphalt Uses of

التركيب الكيميائي للاسفلت Chemical Composition of Asphalt