

علم الكيمياء

تاريخ الكيمياء والعلماء المشاهير

التحاضير والتجارب الكيميائية

المخاطر والوقاية في الكيمياء

اخرى

مقالات متنوعة في علم الكيمياء

كيمياء عامة


الكيمياء التحليلية

مواضيع عامة في الكيمياء التحليلية

التحليل النوعي والكمي

التحليل الآلي (الطيفي)

طرق الفصل والتنقية


الكيمياء الحياتية

مواضيع عامة في الكيمياء الحياتية

الكاربوهيدرات

الاحماض الامينية والبروتينات

الانزيمات

الدهون

الاحماض النووية

الفيتامينات والمرافقات الانزيمية

الهرمونات


الكيمياء العضوية

مواضيع عامة في الكيمياء العضوية

الهايدروكاربونات

المركبات الوسطية وميكانيكيات التفاعلات العضوية

التشخيص العضوي

تجارب وتفاعلات في الكيمياء العضوية


الكيمياء الفيزيائية

مواضيع عامة في الكيمياء الفيزيائية

الكيمياء الحرارية

حركية التفاعلات الكيميائية

الكيمياء الكهربائية


الكيمياء اللاعضوية

مواضيع عامة في الكيمياء اللاعضوية

الجدول الدوري وخواص العناصر

نظريات التآصر الكيميائي

كيمياء العناصر الانتقالية ومركباتها المعقدة


مواضيع اخرى في الكيمياء

كيمياء النانو

الكيمياء السريرية

الكيمياء الطبية والدوائية

كيمياء الاغذية والنواتج الطبيعية

الكيمياء الجنائية


الكيمياء الصناعية

البترو كيمياويات

الكيمياء الخضراء

كيمياء البيئة

كيمياء البوليمرات

مواضيع عامة في الكيمياء الصناعية

الكيمياء الاشعاعية والنووية
Poly tetra fluoro ethylene
المؤلف:
A. Ravve
المصدر:
Principles of Polymer Chemistry
الجزء والصفحة:
382
2026-02-03
75
Poly tetra fluoro ethylene
This monomer can be prepared from chloroform [275]:
Tetrafluoroethylene boils at -76.3 C.It is not the only product from the above pyrolytic reaction of difluoro chloromethane. Other fluorine by-products form as well and the monomer must be isolated. The monomer polymerizes in water at moderate pressures by free-radical mechanism. Various initiators appear effective [276]. Redox initiation is preferred. The polymerization reaction is strongly exothermic, and water helps dissipate the high heat of the reaction. A runaway, uncontrolled polymerization can lead to explosive decomposition of the monomer to carbon and carbon tetrafluoride [277]:
Polytetrafluoroethylene is linear and highly crystalline [278]. Absence of terminal CF2 = CF- groups shows that few, if any, polymerization terminations occur by disproportionation but probably all take place by combination [279]. The molecular weights of commercially available polymers range from 39,000 to 9,000,000. Polytetrafluoroethylene is inert to many chemical attacks and is only swollen by fluorocarbon oils at temperatures above 300C. The Tm of this polymer is 327C and the Tg is below 100C. The physical properties of polytetrafluoroethylene depend upon crystallinity and on the molecular weight of the polymer. Two crystalline forms are known. In both cases the chains assume helical arrangements to fit into the crystalloids. One such arrangement has 15 CF2 groups per turn and the other has 13. Polytetrafluoroethylene does not flow even above its melting point. This is attributed to restricted rotation around the C–C bonds and to high molecular weights. The stiffness of the solid polymer is also attributed to restricted rotation. The polymer exhibits high thermal stability and retains its physical properties over a wide range of temperatures. The loss of strength occurs at about the crystalline melting point. It is possible to use the material for long periods at 300C without any significant loss of its strength.
الاكثر قراءة في كيمياء البوليمرات
اخر الاخبار
اخبار العتبة العباسية المقدسة
الآخبار الصحية

قسم الشؤون الفكرية يصدر كتاباً يوثق تاريخ السدانة في العتبة العباسية المقدسة
"المهمة".. إصدار قصصي يوثّق القصص الفائزة في مسابقة فتوى الدفاع المقدسة للقصة القصيرة
(نوافذ).. إصدار أدبي يوثق القصص الفائزة في مسابقة الإمام العسكري (عليه السلام)