علم الكيمياء
تاريخ الكيمياء والعلماء المشاهير
التحاضير والتجارب الكيميائية
المخاطر والوقاية في الكيمياء
اخرى
مقالات متنوعة في علم الكيمياء
كيمياء عامة
الكيمياء التحليلية
مواضيع عامة في الكيمياء التحليلية
التحليل النوعي والكمي
التحليل الآلي (الطيفي)
طرق الفصل والتنقية
الكيمياء الحياتية
مواضيع عامة في الكيمياء الحياتية
الكاربوهيدرات
الاحماض الامينية والبروتينات
الانزيمات
الدهون
الاحماض النووية
الفيتامينات والمرافقات الانزيمية
الهرمونات
الكيمياء العضوية
مواضيع عامة في الكيمياء العضوية
الهايدروكاربونات
المركبات الوسطية وميكانيكيات التفاعلات العضوية
التشخيص العضوي
تجارب وتفاعلات في الكيمياء العضوية
الكيمياء الفيزيائية
مواضيع عامة في الكيمياء الفيزيائية
الكيمياء الحرارية
حركية التفاعلات الكيميائية
الكيمياء الكهربائية
الكيمياء اللاعضوية
مواضيع عامة في الكيمياء اللاعضوية
الجدول الدوري وخواص العناصر
نظريات التآصر الكيميائي
كيمياء العناصر الانتقالية ومركباتها المعقدة
مواضيع اخرى في الكيمياء
كيمياء النانو
الكيمياء السريرية
الكيمياء الطبية والدوائية
كيمياء الاغذية والنواتج الطبيعية
الكيمياء الجنائية
الكيمياء الصناعية
البترو كيمياويات
الكيمياء الخضراء
كيمياء البيئة
كيمياء البوليمرات
مواضيع عامة في الكيمياء الصناعية
الكيمياء الاشعاعية والنووية
Preparation of Sodium Metal for synthesis
المؤلف:
........
المصدر:
LibreTexts Project
الجزء والصفحة:
............
13-3-2019
1282
Preparation of Sodium Metal for synthesis
Sodium metal is often used as a strong base to prepare sodium derived salts. It is also used in Birch reductions. Because it is typically stored under oil, the oil must typically be removed.
- Obtain a bucket of sand, LithX powder or a class D fire extinguisher. You should be wearing gloves, eye protection and a labcoat.
- Remove the sodium metal from the container, allowing the excess oil to fall back into the jar
- Cut the sodium to approximately the appropriate size while there is still a small amount of oil remaining on the metal. You will notice that shortly after the metal is cut, it turns from a bright metallic color to a dull white color. This is normal.
- Place any unneeded sodium back in the oil.
- The sodium you wish to weigh out should be patted dry with paper towels to remove excess oil. It can be rinsed with hexanes over the towels.
- Weigh out the appropriate amount of sodium by gently cutting unneeded pieces from the block.
- Add sodium metal to your reaction.
Alternatively, the sodium metal can be removed from the container, and placed into a beaker of an alkane solvent such as hexane or heptane. The sodium can be cut into appropriate sized pieces with tweezers and a scalpel while immersed in the solvent, minimising air exposure. This technique can also be used to handle other alkali metals such as lithium and potassium.
الاكثر قراءة في الجدول الدوري وخواص العناصر
اخر الاخبار
اخبار العتبة العباسية المقدسة

الآخبار الصحية
