Solubility

Although solvents may form two visibly distinct phases when mixed together, they are often somewhat soluble in each other and will, in fact, become mutually saturated when mixed with each other. Data on the solubility of various solvents in water (Table 1.1) and on the solubility of water in other solvents (Table 1.2) should be consulted when selecting an extraction solvent pair. For example, 1.6% of the solvent dichloromethane (or methylene chloride) is soluble in water. Conversely, water is 0.24% soluble in dichloromethane. According to Table 1.2, when the phases are separated for recovery of the extracted analyte, the organic solvent layer will contain water.

Table 1.1. Solubility in Water

Similarly, according to Table 1.1, after extraction the depleted aqueous phase will be saturated with organic solvent and may pose a disposal problem. (Author’s note:I previously recounted my LLE experience with disposal of extracted aqueous samples that were cleaned of pesticide residues but saturated with diethyl ether. Diethyl ether is 6.89% soluble in water at 20º C.)

Table 1.2. Solubility of Water in Each Solvent

مواضيع ذات صلة

الشكل الوضعي للسكريات الأحادية configuration of monosaccharides

نظام استخلاص الجزئيات البسيطة

اختيار الطور الجديد وعدد مرات الاستخلاص

ميكانيكية الاستخلاص

طبيعة الصنف المستخلص

الاستخلاص بالمذيب

امتصاص الشعاع الكهرومغناطيسي وطيف الامتصاص

الطرق الكيميائية الطيفية في التحليل.

طبيعة الكيمياء التحليلية

التحليل بالحقن الجرياني المتقطع Batch flow injection analysis

الحقن الجرياني متعدد التخفيف Multi-commutation in FIA

التحليل بالحقن المتعاقب Sequential Injection Analysis