علم الكيمياء
تاريخ الكيمياء والعلماء المشاهير
التحاضير والتجارب الكيميائية
المخاطر والوقاية في الكيمياء
اخرى
مقالات متنوعة في علم الكيمياء
كيمياء عامة
الكيمياء التحليلية
مواضيع عامة في الكيمياء التحليلية
التحليل النوعي والكمي
التحليل الآلي (الطيفي)
طرق الفصل والتنقية
الكيمياء الحياتية
مواضيع عامة في الكيمياء الحياتية
الكاربوهيدرات
الاحماض الامينية والبروتينات
الانزيمات
الدهون
الاحماض النووية
الفيتامينات والمرافقات الانزيمية
الهرمونات
الكيمياء العضوية
مواضيع عامة في الكيمياء العضوية
الهايدروكاربونات
المركبات الوسطية وميكانيكيات التفاعلات العضوية
التشخيص العضوي
تجارب وتفاعلات في الكيمياء العضوية
الكيمياء الفيزيائية
مواضيع عامة في الكيمياء الفيزيائية
الكيمياء الحرارية
حركية التفاعلات الكيميائية
الكيمياء الكهربائية
الكيمياء اللاعضوية
مواضيع عامة في الكيمياء اللاعضوية
الجدول الدوري وخواص العناصر
نظريات التآصر الكيميائي
كيمياء العناصر الانتقالية ومركباتها المعقدة
مواضيع اخرى في الكيمياء
كيمياء النانو
الكيمياء السريرية
الكيمياء الطبية والدوائية
كيمياء الاغذية والنواتج الطبيعية
الكيمياء الجنائية
الكيمياء الصناعية
البترو كيمياويات
الكيمياء الخضراء
كيمياء البيئة
كيمياء البوليمرات
مواضيع عامة في الكيمياء الصناعية
الكيمياء الاشعاعية والنووية
Analysis of Standard Samples
المؤلف:
D. A. Skoog, F. J.Holler, D M. West, and S. R. Crouch
المصدر:
Fundamentals of Analytical Chemistry
الجزء والصفحة:
9th. p 90
24-4-2017
1891
Analysis of Standard Samples
The best way to estimate the bias of an analytical method is by analyzing standard reference materials (SRMs), materials that contain one or more analytes at known concentration levels. Standard reference materials are obtained in several ways. Standard materials can sometimes be prepared by synthesis. In this process, carefully measured quantities of the pure components of a material are measured out and mixed in such a way as to produce a homogeneous sample whose composition is known from the quantities taken. The overall composition of a synthetic standard material must closely approximate the composition of the samples to be analyzed. Great care must be taken to ensure that the concentration of analyte is known exactly. Unfortunately, a synthetic standard may not reveal unexpected interferences so that the accuracy of determinations may not be known. Hence, this approach is not often practical. SRMs can be purchased from a number of governmental and industrial sources. For example, the National Institute of Standards and Technology (NIST) (formerly the National Bureau of Standards) offers over 1300 standard reference materials including rocks and minerals, gas mixtures, glasses, hydrocarbon mixtures, polymers, urban dusts, rainwaters, and river sediments. The concentration of one or more of the components in these materials has been determined in one of three ways: (1) by analysis with a previously validated reference method, (2) by analysis by two or more independent, reliable measurement methods, or (3) by analysis by a network of cooperating laboratories that are technically competent and thoroughly knowledgeable with the material being tested. Several commercial supply houses also offer analyzed materials for method testing.
Often, analysis of standard reference materials gives results that differ from the accepted value. The question then becomes one of establishing whether such a difference is due to bias or to random error.
الاكثر قراءة في مواضيع عامة في الكيمياء التحليلية
اخر الاخبار
اخبار العتبة العباسية المقدسة

الآخبار الصحية
